Pure Water

Multi-Stage Purification Process 

Our system is designed to remove ALL contaminants and produce drinking water of unequaled purity. This process includes; ion exchange, carbon, reverse osmosis, & ozone. 

ION EXCHANGE
Special beads made of an ionic resin capture a range of mineral salts.

GRANULATED ACTIVATED CARBON
This process removes toxic organic chemicals by absorption into the billions of microscopic pores found in the 1,000 acres of carbon surface area. What makes our carbon filtration unique, is the amount of time the water is in contact with the carbon. If water is rushed through this phase, as in systems which may be required to produce large quantities of water in a short time, the effectiveness is drastically reduced.

REVERSE OSMOSIS (RO)
In this two-stage treatment process, water under pressure is forced through a membrane having microscopic holes only .0005 of a micron in diameter. That's two ten millionths of an inch — bacteria range from .2 to 1 micron in width and virus from .02 to .4 micron in diameter so they cannot pass through to our product water.

ULTRA-FILTRATION
This takes care of residuals which are not repelled by the RO action. Here, the pressure on the water causes the H2O to pass through the membrane at the molecular level, leaving behind any foreign substances.              
DISSOLVING IMPURITIES
Impurities that are even smaller than water molecules themselves; mineral salts, sodium, toxic metals are removed. The RO membrane rejects these impurities by repelling them from its surface through a complex process involving dielectric molecular interaction. They are then washed away before even reaching the membrane.
CARBON FILTRATION - AGAIN!
One more pass through carbon in our dispensing bay just before the water enters your bottle, ensures the best quality water and polishes the taste!

OZONE (O3)
WSS goes one step further with the addition of ozone. Injected in measured amounts throughout our tanks and product water lines, keeping them completely free of recontamination by airborne micro-organisms. Perhaps most importantly, O3 passing into a bottle with our pure water, destroys most bacteria that may exist within the container. Ozone in bottles will increase shelf life, and as it quickly converts to regular oxygen (O2), it leaves a light bubbly quality you'll love.

By using Ozone, we are able to keep all our water pathways sterile. This means no biological contamination in our holding tanks or delivery lines. An added benefit of which is that your bottles get sterilized as they are being filled!

Tap VS. Purified

While generally regarded as a safe drinking source, tap water is cleaned municipally with chlorine. A by-product is created from this disenfection process called "Trihalomethanes", or "THMs". The levels of THMs are dependent on the amount of naturally occurring organic material found in the source water and the amount of chlorine used in disinfection.

According to the EPA:
"Total Trihalomethanes.
Some people who drink water containing trihalomethanes in excess of EPA's standard over many years may experience problems with their liver, kidneys, or central nervous systems, and may have an increased risk of getting cancer."

MSPP removes

lead, mercury, asbestos, minerals, salts, nitrates, organic and inorganic contaminants, bacteria, virus and a host of man-made chemical pollutants such as chlorine, PCEs, THMs, and TCEs.